(1) The plans to be submitted in terms of section 5 shall compromise-

a) a site-plan prepared in accordance with the provisions of section 13; and

b) a complete set of working-drawings prepared in accordance with the provisions of section 14; and

c) plans and sections of any sewerage and drainage work to be undertaken in accordance with the provisions of section 15; and

d) a statement of the proposed use of all the various parts of the proposed buildings; and

e) where a structure requires stress calculations covered by any provision in Chapter 3, a certificate on the appropriate form provided by the local authority, which-

i) is signed by the structural engineer who made or checked the calculations;

ii) gives an assurance that such calculations were made or checked by a structural engineer; and

iii) gives an undertaking that the carrying out of work to which those calculations relate will be supervised by an architect or structural engineer; and

iv) where the local authority indicates that it is required, provided for the furnishing of complete and self explanatory structural design calculations and drawings; and

f) the estimated value of the work; and

g) such particulars as may be required elsewhere in these by-laws

(2) All plans shall be dated and signed-

a) in the case of structural detail drawings, by the structural engineer responsible for their preparation;

b) in all other cases, by the architect or other person responsible for their preparation

(3) Every signature affixed to a plan in terms of subsection (2) shall be easily legible or otherwise identified, so that the local authority can readily determine whose signature it is